| Picture |
Machine |
Model Number |
Capabilities |
 |
CNC Wysong Plate Shear |
Model # 1010 |
CNC back gauge
Shear 10 feet of 10 gauge mild steel |
| |
Famco Plate Shear |
Model # E12966 |
Shear 6 feet of 12 Gauge mild steel |
| |
Verson Press Brake |
60 Ton |
Bend 8 feet of 12 Gauge mild steel |
| |
Verson Press Brake |
45 Ton |
Bend 6.5 feet of 12 gauge mild steel |
 |
DI-ACRO CNC Press Brake |
17 Ton |
CNC Back gauge
Bend 4 feet of 14 gauge mild steel |
 |
Amada Press Brake |
RG 35S |
38 Ton bend 4 feet of 12 gauge mild steel
CNC back gauge |
| |
Miller TIG Welder |
350 Syncrowave |
TIG Weld Aluminum, Stainless, and Inconel |
| |
Weltronic Spot Welder |
807-0023 |
24 inch throat .125 inch mild steel |
| |
Pines Tube Bender |
Model # 2 |
Bend 1.875 inch solid bar, mild steel |
 |
Niagara Straight Side Press |
96 Ton |
48" X 33" Tee slotted bolster table |
| |
Federal Punch Press |
60 Ton |
29" X 18.5" bolster plate |
 |
Komatsu Punch Press |
66 Ton |
35.5" X 21.5" bolster plate w/ air cushion
And air eject |
| |
P/A Industries Coil Feeder |
Model # F12 |
6 inches of 22 gauge mild steel |
| |
BewoCold Saw |
CPO-250 |
Saw 3 X 3 mild steel |
| |
Bewo Cold Saw |
CPO-315/HA/LT |
Saw 4 X 4 mild steel |
 |
Everite ECM Cut Off Saw |
TC1C |
Burr free cut .125 to 1.5 inch Stainless,
Aluminum, or Inconel tubing, bar, or extrusion |
| |
Regal Cut-to-length Line |
HS-1636-A |
36 inches 18 gauge mild steel |
| |
Regal Coil Upender |
3000-48-60-HCU |
3000 pound capacity |
| |
Leonard Tube End Finisher |
2CP |
Flare, Square, and Bead Tubing |
| |
Strippit Sheet Metal Fabricator |
Super 30/30 |
Punch .25 inch mild steel |
 |
Amada Turret Punch Press |
VIPROS 255 |
High speed punching and high quality
Forming, 22 tons, 50" X 100" sheet
Capacity, with a Sheet loader/unloader.
Repeatability +/- .0006 inches |
 |
Vacuum Skin Pack Machine |
|
|
